Frymaster GF14 Manuel d'utilisateur

Frymaster, a member of the Commercial Food Equipment Service Association, recommends using CFESA Certified Technicians. 24-Hour Service Hotline 1

1-6 1.7.4 Replacing the Gas Valve DANGER Drain the frypot or remove the handle from the drain valve before proceeding further. 1. Disconnect fryer

1-7 13. Remove the manometer or pressure gauge fitting from the pressure tap hole and reinstall the pipe plug. 14. Place the gas valve in the PILOT p

1-8 1: Remove these screws to release guard.3: Press down on top of thermopile, forcing it out of the pilot bracket.2: Bend this clip outwa

1-9 7. Remove the screw from the frypot hold-down bracket located at the center of the cabinet cross brace. 8. Dismount the thermostat control from

1-10 Pilot Does Not Remain Lit When Gas Valve Knob is Released The electromechanical Honeywell gas valve used on the GF14 and GF40 fryers has a pair

1-11 1.8.2 Improper Burner Functioning If the burner lights on one side only, the probable causes are a missing or misaligned rear deflector or impr

1-12 1.8.4 Leaking Leakage of the frypot almost always will be due to improperly sealed high-limits, thermostats, or drain fittings. When installed

2-1 GF14/GF40 SERIES GAS FRYERS CHAPTER 2: GF14/GF40 PARTS LIST 1/1/08 and Later 142538976ACCESSORIES Item Part # Component 1 803-0015 Basket, Fu

2-2 Item Part # Component * 809-0171 Basket hanger screw (spacer 809-0921) * 803-0188 Sediment tray, GF14 * 803-0103 Sediment tray, GF40

2-3 Item Part # Component* 826-1140 GF14 Conversion Kit, LP to Natural * 826-1143 GF40 Conversion Kit, Natural to LP * 826-1144 GF40 Conversio

NOTICE This appliance is intended for professional use only and is to be operated by qualified personnel only. A Frymaster/DEAN Factory Authorized S

2-4 Cabinetry Item Part # Component 1 200-6903 Back 2 816-0656 Insulation, back Sides 3 201-6917 Side, left, stainless 4 202-6917 Side, rig

2-5 Frypots Item Part # GF14 Frypot Components 1 823-1024 Flue assembly 2 823-6655 Frypot * 823-4493 Sysco-branded fryers 806-7972 Operating t

2-6 Item Part # GF40 Frypot Components 1 806-5567 Flue 2 823-6667 Frypot 3 826-1177 Hi-limit thermostat * 807-1692 Operating thermostat * 810-156

THIS PAGE INTENTIONALLY LEFT BLANK

Frymaster, L.L.C., 8700 Line Avenue, Shreveport, Louisiana 71106 TEL 1-318-865-1711 FAX (Parts) 1-318-219-7140 FAX (Tech Support) 1-318-219-7135 P

DANGER Adequate means must be provided to limit the movement of this appliance without depending upon the gas line connection. Single fryers equi

i GF14 and GF40 SERIES GAS FRYERS TABLE OF CONTENTS CHAPTER 1: Service Procedures 1.1 Functional Description...

1-1 GF14/GF40 SERIES GAS FRYERS CHAPTER 1: SERVICE PROCEDURES 1.1 Functional Description The GF14 and GF40 Series fryers contain a welded steel (stai

1-2 Thermostats 1. These fryers are equipped with adjustable operating thermostats. The temperature at which the thermostat opens and closes is adju

1-3 1.6 Adjusting the Pilot Flame 1. Remove the cap shown in the illustration below to access the pilot flame adjustment screw in the gas

1-4 5. Straighten the clips that secure the thermostat bulb to the frypot. Use a slotted socket to unscrew the thermostat from the frypot. 6. Loose

1-5 4. Ensure threads inside the fitting are clean and apply a small amount of Loctite™ PST56765 compound or equivalent to the threads of the new hi