Frymaster Gas Rethermalizers FBRA18 Series Manuel d'utilisateur télécharger pdf (Page 21)

4-4

3. Place the gas valve in the ON position. Place the controller power switch in the ON position.

When the burner lights and continues to burn, compare the indicated pressure to the table

below.

Burner Manifold Gas

Pressures

Gas Pressure

Natural

3.5" W.C.

0.8 kPa

8.25" W.C.

2.5 kPa

4. If necessary, adjust the burner gas pressure by removing the cap from the gas valve regulator

and turning the regulator screw to obtain the correct pressure. When the correct pressure is

obtained, reinstall the cap.

5. Place the controller power switch and the gas valve in the OFF position. Remove the fitting

from the pressure tap hole and reinstall the pressure tap plug.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 61 62

Pas de commentaire

Frymaster Gas Rethermalizers FBRA18 Series Manuel d'utilisateur Page 21