Frymaster BID80 Series Manuel d'utilisateur télécharger pdf (Page 40)

BID80 SERIES GAS FRYERS

CHAPTER 6: COMPUTER OPERATION

6–5

6.2 Programming the Computer Magic III.5 Computer (cont.)

Sensitivity adjusts computer-cooking time to compensate for the drop in cooking oil/shortening

temperature when a basket of product is placed into the fryer. Sensitivity decreases or

increases cooking time to counterbalance variances in product density, basket-load size, and

initial temperature. A proper sensitivity setting will ensure a high quality product. For example:

4 ounces of fries can be programmed to cook to the same quality as 2 pounds. A good initial

setting is 4 or 5. Some experimenting with the range of 1 to 9 may be required to achieve

optimum quality.

7. will now appear in the left display. A previously entered cook-time will appear in the

right display. If that time is correct, press the switch. If you wish to change the time, enter

the desired time in minutes and seconds. (The new time will be displayed in the left display.)

Press the switch to lock in the setting.

now appears in the left display. The previous shake time (if any) will appear in the right

display. If a product requires shaking during the cooking process, set the shake time by pressing

the number of minutes to cook before shaking. Press the switch to lock in the time. If no

shake time is required, press "0" and press the switch. Example: Total cook time 3:00

minutes, shake after cooking 1:00 minute.

At the end of 1:00 minute, a beeper will sound and the product button indicator will flash for

three seconds.

will now appear in the left display. Set the time to hold the cooked product from 13

seconds to 60 minutes. Press the switch. If you do not wish to use the hold time, enter "0"

and press the switch.

10. will appear in the left display. If you desire to program more products, return to Step 5.

If no more programming is required, lock in program by pressing the switch.

6.2.1 Boil Feature

CAUTION

Do not drain water or boil-out solution into the filtration system (if applicable). Irreparable

damage to the filter system will result and all applicable warranties will be voided.

1. Before switching the fryer "ON", close the frypot drain valve. Fill empty frypot with mixture of

cold water and detergent. Follow detergent instructions when mixing.

NOTE: Boil Mode will not turn on both sides of computer. Each side will have to be turned on

separately.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 61 62

Pas de commentaire

Frymaster BID80 Series Manuel d'utilisateur Page 40