Frymaster 14 Series Manuel d'utilisateur télécharger pdf (Page 17)

3–4

1. Open the cabinet and slide the JIB

from the cabinet (see Figure 5).

Figure 5

2. Remove the cap and pour any remaining oil in the

container into all fry vats equally (see Figure 6).

Figure 6

3. With the jug upright remove the cap

and foil seal (see Figure 7).

Figure 7

4. Put the tube in the new full container (see Figure 8).

Figure 8

5. Slide the JIB onto the shelf inside the fryer cabinet (as

seen in Figure 5).

6. Press the JIB reset switch to turn the yellow JIB LED

off (see Figure 9).

WARNING:

Do not add HOT or

USED oil to a JIB.

Figure 9

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 77 78

Pas de commentaire

Frymaster 14 Series Manuel d'utilisateur Page 17