Frymaster 14 Series Manuel d'utilisateur télécharger pdf (Page 42)

4-24

4.12 Programming Level One

Level one programming is used to enter new products, control when AIF (auto intermittent filtration)

is disallowed, and perform deep clean (boil- out) and high-limit tests.

To enter Level 1 programming mode:

1. With the computer OFF, press the TEMP and INFO buttons

simultaneously (see Figure 97) for THREE seconds until LEVEL 1 is

displayed; a chirp sounds.

Figure 97

The computer displays ENTER Code and sounds an alert.

2. Enter 1234 (see Figure 98).

(1234)

Figure 98

The computer displays level 1 program for three seconds changing to Product

selection.

3. Press the t and ubuttons (see Figure 99) to scroll between:

a. Product selection See pg. 4-24

b. aif clock See pg. 4-25

c. DEEP CLEAN MODE See pg. 4-27

d. high limit test See pg. 4-30

e. Fryer setup See pg. 4-9

Figure 99

4. With the desired selection displayed, press the  (1 yes) button to select

chosen menu item (see Figure 100).

Figure 100

4.12.1 PRODUCT SELECTION

1. To add or edit products in the product selection mode see pg. 4-12 ADDING A NEW

PRODUCT ITEM TO THE MENU Steps 4-30.

The submenus under product selection are:

a. Name – Enter full product name limit eight characters (FR FRIES).

b. cook time – Enter cook time (ex. 3:30 as 0330).

c. temp – Enter cook temperature. (ex. 335° as 335).

d. cook id – Enter four (4) letter product ID (ex. CPSY).

e. qual tmr – Enter quality time for hold time (ex. 7:00).

f. DUTY TIME 1 – Enter the seconds into the cook cycle that the first duty alarm

sounds. (ex. 30 seconds- to shake fries).

g. DUTY TIME 2 – Enter the seconds into the cook cycle that a second duty alarm

sounds.

h. aif disable – Enter YES if AIF is to be disabled for specific products.

i. assign btn – Assigns menu items to a specific button for simplified cooking.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 77 78

Pas de commentaire

Frymaster 14 Series Manuel d'utilisateur Page 42