Frymaster 14 Series Manuel d'utilisateur télécharger pdf (Page 25)

4-7

4.7 M2007 Button Description and Functions

4.7.1 Navigation Buttons

The menu on the M2007 uses 34and tu buttons to

navigate the various menus and submenus (see Figure 1).

Figure 1

When programming, the left screen shows a menu or

submenu item. The right screen is for data entry. Data is

entered with alpha-numeric characters, scrolling through

lists or by toggling between choices (see Figure 2).

Left Display Right Display

Figure 2

During programming if a button is not pushed within one minute, the computer returns to operation

mode.

4.7.2 Filter, Temperature and Info Buttons

The < FLTR and FLTR > buttons (see Figure 1) are used to filter the left and right vats of a split

vat fryer on demand, while the right FLTR > button is used to filter a full vat on demand. The

FLTR buttons, if pressed once will display the amount of cook cycles remaining until a filtration

prompt. When the FLTR button is pressed twice, the date and time of the last filter will be

displayed. The TEMP button, if pressed once while the fryer is on, displays current vat

temperature on both sides. If the TEMP button is pressed twice while the fryer is on, it shows the

setpoint temperatures of the vats. If the fryer is off, the display shows the current versions of

software. The INFO button (see Figure 1), if pressed once when the fryer is on, shows the

recovery time for each vat from the last test. Recovery displays the time required for the fryer to

raise the temperature of the oil 50°F (28°C) between 250°F (121°C) and 300°F (149°C). Maximum

recovery time should not exceed 1:40 for electric or 2:25 for gas. If the INFO button is pressed and

held for three seconds it shows information such as usage, filter statistics and last cook cycles (see

page 4-38 for more details on the INFO button).

4.7.3 Cook Cycle and Selection Buttons

The

  buttons are dual-function buttons shared with

the number 1 and 2 buttons. They are located directly

below the LED displays (see Figure 3). Use these buttons

to select or cancel functions. The  button is used to back

out of and quit submenus.

Figure 3

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 77 78

Pas de commentaire

Frymaster 14 Series Manuel d'utilisateur Page 25