Frymaster 14 Series Manuel d'utilisateur télécharger pdf (Page 62)

5-3

If YES is chosen, SKIM VAT is displayed for ten seconds changing to cnfm fltr. Skim

the crumbs from the oil with a front to back motion, removing as many crumbs as possible from

each vat. This is critical to optimizing usable oil life and quality in the oil.

Note: If NO is chosen in response to either FLTR now or Cnfm FLTR, filtering is

cancelled and the fryer resumes normal operation. The FLTR now prompt is

displayed once the FLTR AFTR count is satisfied. This sequence repeats until yes is

chosen.

If the filter pan is not fully engaged, the computer displays CHK PAN. Once the filter pan is

pushed fully into place, press the 9 (1) button to continue.

When 9 (1) YES is chosen, the fryer displays filtering and the auto filtration cycle is

started.

Note: Simultaneous filtering of multiple vats does not occur.

Once filtering is complete the computer display changes to low temp until the fryer reaches

setpoint.

Once fryer reaches setpoint and the computer display changes to the product or dashed lines, the

fryer is ready for use.

The complete filtering process takes roughly three minutes.

DANGER

Keep all items out of drains. Closing actuators may cause damage or injury.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 77 78

Pas de commentaire

Frymaster 14 Series Manuel d'utilisateur Page 62